IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry.

This is a must-have for inspectors, operators and others with an interest in the acceptance criteria for electronic assemblies. IPC-A-610 is developed in synergy with J-STD-001 and IPC/WHMA-A-620. Number of Pages: 416 Release Date: 10/15/2020

This is the NEW Revision "D"

IPC/WHMA-A-620 remains the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC and the Wire Harness Manufacturers Association (WHMA) continued to work together to develop this significant update.

The standard has over 700 full-color pictures and illustrations. Included in the 19 chapters are criteria for wire prep, soldering to terminals, crimping of stamped and formed contacts and machined contacts, insulation displacement connectors, ultrasonic welding, splicing, connectors, molding, marking, coax/biax cables, wrapping/lacing, shielding, assembly and wire-wrap terminations.

Also covered are the criteria for molding, potting, splicing, crimp contacts...

IPC-J-STD-001H is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise, the IPC-J-STD-001H standard brings the latest criteria to the industry including guidance on the use of x-ray to inspect through-hole solder conditions that are not visible by any other means.

IPC-J-STD-001H is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies. J-STD-001 is developed in synergy with IPC-A-610 and is supported by IPC-HDBK-001 for those wanting additional information and explanation on...

IPC J-STD-001HS space and military addendum, supplements or replaces specifically identified requirements of IPC J-STD-001H requirements for soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments of getting to and operating in space and military applications. Pages: 36

The IPC-HDBK-001H is a companion document to J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies providing guidance and supporting information for the requirements found in the standard. IPC-HDBK-001H is structured to map paragraph-to-paragraph with the standard, it includes the "how-to" and "why" behind many of the criteria in an easy-to-use reference handbook.

The officially recognized soldering certification training kit for IPC-7711/7721 Revision "C" operator (CIS) certification. This kit contains a variety of components to allow for the evaluation and testing of students for not only initial certification, but also recertification.

Includes optional components and features such as SMT tantalum caps and 0201 resistors, inner layer and multi-layer repair sections, conformal coating section, damaged surface conductors ready for repair and components with adhesive staking.  Includes one (1) assembled board and one (1) set of components.

Contains the following materials:
(1) Fully Assembled Board
(6) 1/4 Watt Resistor
(6) 16 Lead Dip
(6) T05/39 Transistor
(6) Transistor Standoff
(6) CK06...

This is the NEW Revision "E"

IPC/WHMA-A-620 remains the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC and the Wire Harness Manufacturers Association (WHMA) continued to work together to develop this significant update.

The standard has over 700 full-color pictures and illustrations. Included in the 19 chapters are criteria for wire prep, soldering to terminals, crimping of stamped and formed contacts and machined contacts, insulation displacement connectors, ultrasonic welding, splicing, connectors, molding, marking, coax/biax cables, wrapping/lacing, shielding, assembly and wire-wrap terminations.

Also covered are the criteria for molding, potting, splicing, crimp contacts...